Siemens SENTRON 3WL10 Series Manual page 135

Mounting circular conductor terminals 4x240 mm² on the guide frame
The circular conductor terminals 4x 240 mm² are provided unmounted with the circuit
breaker.
● Screw the circular conductor terminals 4x240 mm² to the rear terminals for main circuit
connection (for tightening torques, see table Tightening torques at a glance (Page 128)).
Pay attention to the prescribed positioning on the right or left on each terminal for main
circuit connection.
You will find more information in the relevant Operating Instructions (see Chapter
Product-specific information (Page 7)).
Air circuit breaker 3WL10
Manual, 11/2017, L1V30499596002-01
Connection and commissioning
5.2 Mounting and connection
133