Siemens SENTRON 3WL10 Series Manual page 107

● Electronic trip units of the 6-series only: High-resolution data of the current curve:
If an ETU of the 6-series trips, the continuously recording buffer memory and therefore
the high-resolution current curve can be read out before and after this event using the
test device. The triggers for freezing this memory include not only trip reasons but also
various other thresholds, alarms, and events that can be selected user-specifically.
For this expanded functionality, the powerlog software will be available for downloading
as of 2018.
Note
powerconfig is commissioning and maintenance software for all communication-capable
SENTRON products from Siemens. With this software, the circuit breaker can be
parameterized and commissioned and its settings can be archived and, in the operating
phase, values from the plant (current, voltage, etc.) can be read out and the status of the
circuit breaker can be acquired.
The powerconfig software (https://support.industry.siemens.com/cs/ww/en/view/63452759)
is freely available.
Air circuit breaker 3WL10
Manual, 11/2017, L1V30499596002-01
3.5 Breaker Data Adapters and test devices
Accessories
105