Siemens SENTRON 3WL10 Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Circuit breakers
  5. SENTRON 3WL10
  6. Manual

Siemens SENTRON 3WL10 Manual

Air circuit breaker & compact circuit breaker
Hide thumbs Also See for SENTRON 3WL10:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Siemens SENTRON 3WL10

Summary of Contents for Siemens SENTRON 3WL10

  • Page 2 Introduction Description Commissioning Configuration Protection devices Communication 3WL10 Air Circuit Data structure Breakers & 3VA27 Molded Case Circuit Breakers List of abbreviations System Manual 04/2020 L1V30499596021-02...
  • Page 3 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 4: Table Of Contents

    Table of contents Introduction ............................. 5 About this documentation ......................5 Product-specific information ..................... 5 Safety instructions ........................5 Reference documents ....................... 6 Advanced training courses ....................... 7 3WL10 / 3VA27 circuit breakers ....................7 1.6.1 System overview ........................7 1.6.2 Software applications ........................
  • Page 5 Table of contents System Manual, 04/2020, L1V30499596021-02...

  • Page 6: Introduction

    In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens' products and solutions constitute one element of such a concept. Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks.

  • Page 7: Reference Documents

    Siemens' products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer's exposure to cyber threats.

  • Page 8: Advanced Training Courses

    Schalten, Schützen, Verteilen in Niederspannungsnetzen (Switching, Protection and Distri- ISBN 3-89578-041-3 bution in Low-Voltage Networks), substantially extended and revised edition 1997 Siemens: Residual Current Protective Devices, Low-Voltage Circuit Protection Technology E10003-E38-9T-B3011 Primer Siemens AG © 04 / 2009 Advanced training courses Find out about training courses on offer on the following link.
  • Page 9 Introduction 1.6 3WL10 / 3VA27 circuit breakers Overview ① Position signaling switch of the circuit breaker in the guide frame (COM PSS), not shown in the figure. ② Breaker Connect module, external power supply ③ Module slots for communication modules or digital I/O modules ④...

  • Page 10: Software Applications

    Software applications Energy management with powermanager Siemens offers the powermanager software application, which is designed for power and plant monitoring applications. When used in conjunction with SENTRON protection devices such as 3VA, 3WL, 3VL, and PAC as well as equipment supplied by third parties, powermanager is a power monitoring system that reduces energy costs and increases the availability of electrical supply and distribution systems.
  • Page 11 ● Switching recommendations in the event of limit violations ● Remote control of circuit breakers You can find more information on energy management with powermanager in the Internet (https://new.siemens.com/global/en/products/energy/low-voltage/components/sentron- measuring-devices-and-power-monitoring.html). Commissioning and service powerconfig is a commissioning and service software application for communication-capable measuring devices and circuit breakers from the SENTRON product family.
  • Page 12 Introduction 1.6 3WL10 / 3VA27 circuit breakers Figure 1-1 powerconfig Further information on powerconfig can be found on the Internet (https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10230050). System Manual, 04/2020, L1V30499596021-02...

  • Page 13: Individually Configured Circuit Breakers

    You can assemble your own 3WL10/3VA27 circuit breaker simply and quickly in the online configurator and then generate an article number. Online configurator for 3WL10 (https://mall.industry.siemens.com/spice/pcmplus/app/) Online configurator for 3VA27 (https://mall.industry.siemens.com/spice/pcmplus/app/) In the Online Configurator, impermissible combinations are automatically excluded in the article number.

  • Page 14: Description

    Description Communication modules 2.1.1 COM043 (Modbus TCP) Overview The COM043 module offers fast and simple integration in monitoring, maintenance, and energy management systems as well as in industrial automation systems by way of the Modbus TCP module. Communication permits the continuous transfer of data, such as status and measured values, from the 3WL10 / 3VA27 circuit breaker.

  • Page 15: Com042 (Modbus Rtu)

    Description 2.1 Communication modules Technical specifications Feature Value Designation COM043 Article number in conjunction with 3WL10 / 3VA27 Z option F11 Article number (as spare part) 3VW9011-0AT16 Protocol Modbus TCP Transmission medium Ethernet, IEEE 802.3 Transmission rate 10/100 Mbps Port Connection technology An RJ45 socket Simultaneous TCP clients...

  • Page 16: Actuation Module For Remote Operation (Com Act)

    Description 2.1 Communication modules Default settings Feature Value Transmission rate 19200 bps Address Format Technical specifications Feature Value Designation COM042 Article number in conjunction with 3WL10 / 3VA27 Z option F12 Article number (as spare part) 3VW9011-0AT17 Protocol Modbus RTU Transmission medium RS485 Transmission rate...

  • Page 17: Breaker Connect Module

    Description 2.1 Communication modules Figure 2-3 Actuator module COM ACT Technical specifications Feature Value Designation COM ACT Article number (as spare part) 3VW9011-0AT10 Storage temperature −40 °C … +70 °C Operating temperature −25 °C … +70 °C 2.1.4 Breaker Connect module Two versions are available depending on the primary voltage used: ●...

  • Page 18: Iom040 Digital I/O Module

    Description 2.1 Communication modules The Breaker Connect module is installed as standard when the circuit breaker is ordered for communication. Technical specifications Feature Value Designation Breaker Connect module 3WL10 / 3VA27 and communication functions 24 … 48 V AC/DC, included in delivery as standard Article number (as spare part) 3VW9011-0AT07...

  • Page 19: Iom300 External Digital I/O Module

    Description 2.1 Communication modules Figure 2-5 IOM040 digital I/O module The IOM040 digital I/O module can simply be plugged into the slot provided in the auxiliary conductor contact system. Two different communication modules can be used at the same time. If a IOM040 module is used, only one COM module can be used. A Breaker Connect module is always required for the internal power supply of a COM module.

  • Page 20: Position Signaling Switch Communication (Pss - Com)

    Description 2.1 Communication modules Figure 2-6 IOM300 digital I/O module Technical specifications Feature Value Designation IOM300 Article number (as spare part) 3VW9011-0AT20 Voltage ≤ 150 V DC or 250 V AC Max. switching current per contact At ≤ 30 V DC equal to 2 A At 50 V DC equal to 0.8 A At 150 V DC equal to 0.2 A At 250 V AC equal to 4 A...

  • Page 21: Ready-To-Close Signaling Switch For Communication (Com Rtc)

    Description 2.2 Metering function MF Basic and MF Advanced Technical specifications Feature Value Designation PSS - COM Article number (as spare part) 3VW9011-0AT12 Storage temperature −40 °C … +70 °C Operating temperature −25 °C … +70 °C 2.1.8 Ready-to-close signaling switch for communication (COM RTC) The COM RTC module ascertains the ready-to-close state and transmits this information to the communication system.
  • Page 22 Description 2.2 Metering function MF Basic and MF Advanced Figure 2-7 Metering function MF Basic and MF Advanced Metering functions of the ETUs of the 6-series Instantaneous values Measured values Precision Reference standard: IEC 61557-12 Currents (rms value) , neutral Ground-fault current Phase-to-phase voltage (rms value) U12, U23, U31...
  • Page 23 Description 2.2 Metering function MF Basic and MF Advanced Instantaneous values Reactive power: mean and largest kVAR mean Apparent power: mean and largest mean Data logger Recording of measured values with a high sampling rate Measured values Currents L1, L2, L3, N, I Voltages U12, U23, U31 Sampling rate...

  • Page 24: Dsp800 Display

    Description 2.3 DSP800 display Instantaneous values Self-diagnostics Measured values Continuity tests of internal connections Alarm due to discon- Note: nection: current sensor, Tripping of the circuit breaker can be set in the sensors, shunt release case of an alarm (ST) No switching off of circuit breaker (ANSI Alarm due to non- 50BF)
  • Page 25 Description 2.3 DSP800 display Figure 2-8 DSP800 display integrated in the system Technical specifications Feature Value Designation DSP800 Article number (as spare part) 3VA9987-0TD10 Protocol Modbus TCP Transmission medium Ethernet, IEEE 802.3 Transmission rate 100 Mbps Connection technology One RJ-45 socket Total circuit breakers Max.

  • Page 26: Commissioning

    Commissioning Overview Overview The Breaker Connect module is a prerequisite for communication operation. The Breaker Connect module is installed as standard when the circuit breaker is ordered for communication. Figure 3-1 3WL10 / 3VA27 fixed breaker, "plug-and-play" installation – Breaker Connect module plus two modules The COM042 module and COM043 module can simply be plugged into the slot provided in the auxiliary conductor contact system.

  • Page 27: Commissioning Communication Modules

    Commissioning 3.2 Commissioning communication modules See also System overview (Page 7) Commissioning communication modules The COM modules must be enabled either on the ETU display or in the powerconfig software. ⇒ with ETU display ( Display → Settings → Modules → Local bus → ON Setup via local laptop / Ethernet ⇒...
  • Page 28 Settings → Modules → Remote ● With a ping command (Windows search bar, call cmd.exe, enter ping and IP addressed), test whether communication with the device is available. See also Information/Download powerconfig (https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10230050) Getting Started powerconfig (https://support.industry.siemens.com/cs/ww/en/view/109480256) Download powerconfig (http://support.automation.siemens.com/WW/view/en/63452759) System Manual, 04/2020, L1V30499596021-02...
  • Page 29 Commissioning 3.2 Commissioning communication modules System Manual, 04/2020, L1V30499596021-02...

  • Page 30: Configuration

    ● Parameters cannot be written via the front interface of the circuit breaker and the TD410 / TD420. An error message is displayed in powerconfig. See also Commissioning communication modules (Page 26) Industry online support (https://support.industry.siemens.com/) System Manual, 04/2020, L1V30499596021-02...

  • Page 31: Configuring The Communication Function

    3D drawings, Eplan macros, etc. You will find more information on this in the Internet: Online configurator for 3WL10 (https://mall.industry.siemens.com/spice/pcmplus/app/) Online configurator for 3VA27 (https://mall.industry.siemens.com/spice/pcmplus/app/) Figure 4-1 Online configurator – Example view...

  • Page 32: Data Structure

    Data structure Units of information such as status information or measured variables are made available in suitable data formats by products in the SENTRON range. Modbus data formats and byte ordering Identifying data points Abbreviation Description 8-bit unsigned 16-bit unsigned 32-bit unsigned U32SWAPPED 32-bit unsigned with reversed register order...

  • Page 33: Floating-Point Number According To Ieee 754

    Data structure 5.2 Floating-point number according to IEEE 754 You will find more information about storing Float32 (FP32) and Float64 (FP64) in Chapter Floating-point number according to IEEE 754 (Page 32). Floating-point number according to IEEE 754 Float32 (FP32) and Float64 (FP64) are stored in accordance with the following tables: Representation of the 32-bit floating-point number (single precision) in accordance with IEEE 0 …...

  • Page 34: Register Addresses

    Data structure 5.3 Register addresses Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x0002 Current L1 429496729.5 FP32 0x03 0x04 0x0004 Current L2 429496729.5 FP32 0x03 0x04 0x0006 Current L3 429496729.5 FP32 0x03...
  • Page 35 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x0036 Total active −214748364.8 214748364.7 FP32 0x03 power 0x04 0x0038 Apparent power −214748364.8 214748364.7 FP32 0x03 0x04 0x003A Apparent power −214748364.8 214748364.7 FP32 0x03...
  • Page 36 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x0FA0 Commands – R/W First register: Com- 0x03 mand 0x04 (value 0 … 27) 0x10 0: Dummy command 1: Reset trip 2: Reset signals 3: Reset statistics 4: Program start...
  • Page 37 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x0FB6 Number of man- – 65535 0x04 ual operations 0x0FB9 Number of test – 65535 0x04 trips 0x0FC8 Status –...
  • Page 38 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x0FCA Status – – Bit 0: Parameter 0x04 Glitch 1 changed Bit 1: Reset trip Bit 2: Reset circuit breaker Bit 4: Circuit breaker open command...
  • Page 39 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x0FCC Status – – Bit 0/1: Parameteri- 0x04 flags 1 zation via: 0 = No parameteri- zation active 1 = Via CB 2 = Via test device 3 = Via ETU Bit 2: Test running...
  • Page 40 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x0FCF Status – – Bit 0: Ext I/O module 0x04 Accessories 2 - IOM300 Bit 9: Reserved 0x0FD0 Status –...
  • Page 41 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x0FD2 Status – – Reasons for trip: 0x04 tripping opera- Bit 0: Overload pro- tions 1 tection (LT) Bit 1: Short-time- delayed short-circuit current (ST) Bit 2: Instantaneous...
  • Page 42 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x0FD3 Status – – Bit 0: Directional 0x04 tripping opera- short-time-delayed tions 2 short-circuit protec- tion (DST) Bit 1: Overtempera- ture Bit 3: Reverse power active tripped...
  • Page 43 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x0FD5 Status – – Bit 0: Overload (LT) 0x04 warnings, pre-alarm alarms 1 Bit 1: Ground fault (GF) pre-alarm Bit 2: In_pal (1) warning Bit 3: Ground fault...
  • Page 44 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x0FD6 Status – – Bit 0: Overtempera- 0x04 warnings, ture (T) alarm alarms 2 Bit 1: Only over- temperature (T) alarm Bit 2: Only current unbalance (I-NBA)
  • Page 45 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x0FD7 Status – – Bit 0: Internal error 0x04 warnings, Bit 1: cos phi error alarms 3 Bit 2: Phase se- quence error Bit 3: Invalid date warning...
  • Page 46 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x0FD9 Status – – Bit 0: Time and date 0x04 warnings, not synchronized alarms 5 Bit 1: CB bus mod- ules installation error Bit 2: Error in con- figuration...
  • Page 47 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x0FDF Status – – Bit 0: Output 101 0x04 Ext I/O module Bit 1: Output 102 IOM300 Bit 2: Output 103 output A Bit 3: Output 104 Bit 4: Output 105...
  • Page 48 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x1022 Time stamp for 4294967295 – Seconds from 0x04 L2 maximum 00:00:00.000 current 31 DEC 1999 0x1024 L3 minimum 4294967295 –...
  • Page 49 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x11A2 Article number – – – – U8[16] 0x04 0x11AA Number of poles – 0x04 0 = 3 poles 1 = 4 poles 0x11B5 N-conductor...
  • Page 50 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x1226 Rated voltage – R/W 0: 100 V 0x03 Un (V) 1: 115 V 0x04 2: 120 V 0x10 3: 190 V 4: 208 V 5: 220 V...
  • Page 51 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x1591 Function selec- – R/W 0: – 0x03 tion 1: Overload protec- 0x04 I/O module tion (LT) pre-alarm 0x10 IM040 1.
  • Page 52 Data structure 5.3 Register addresses Register Num- Name Unit Min. Max. Fac- Description Valid address ber of function regis- code ters 0x1593 Function selec- – R/W 0: – 0x03 tion 1: Overload protec- 0x04 I/O module tion (LT) pre-alarm 0x10 IM040 2.
  • Page 53 Data structure 5.3 Register addresses System Manual, 04/2020, L1V30499596021-02...

  • Page 54: List Of Abbreviations

    List of abbreviations Overview Table A- 1 Meaning of abbreviations used in this document Abbreviation Meaning AC voltage Actuator module Closing coil Direct voltage Deutsches Institut für Normierung e. V. (German Institute for Standardization) European Standard Electronic trip unit Ground fault (ground-fault protection GF) Ground fault (ground-fault protection) Instantaneous (instantaneous short-circuit protection INST) Input/Output...
  • Page 55 List of abbreviations Abbreviation Meaning Verein Deutscher Ingenieure (Association of German Electrical Engineers) Verein Deutscher Ingenieure (Association of German Engineers) Table A- 2 Meaning of symbols and abbreviations Sym- Meaning bol/abbreviation Inrush current " Initial balanced short-circuit current Let-through energy Making capacity;...
  • Page 56 List of abbreviations Sym- Meaning bol/abbreviation Trip time; delay time; time-lag class Trip time associated with current setting value of adjustable overload protection Trip time associated with short-time delayed tripping current; delay time of S pro- tection Voltage across main contacts of the molded case circuit breaker Maximum voltage;...
  • Page 57 List of abbreviations System Manual, 04/2020, L1V30499596021-02...

  • Page 58: Index

    Index Bit count, 31 Energy management Breaker Connect module powermanager, 9 Functions, 16 Mounting, 25 Technical data with Z option F26, 17 Technical specifications, 17 Fault rectification, 27 Versions, 16 Floating-point number, 32 Circuit breaker IOM040 Creating with powerconfig, 26 Functions, 17 Online configurator, 30 Technical specifications, 18...
  • Page 59 Index Remote control, 15 Spare parts, 12 System time, 32 Technical specifications Breaker Connect module, 17 COM ACT, 16 COM RTC, 20 COM042, 15 COM043, 14 DSP800 display, 24 IOM040, 18 IOM300, 19 Metering function MF Basic and MF Advanced, 23 PSS-COM, 20 Time stamp, 32 Training, 7, 7...

This manual is also suitable for:

Sentron 3va27

Table of Contents