Fisher & Paykel RDV3 User Manual page 73

Self Clean
PROBLEM
During Self Clean, the
oven is louder than usual.
The screen shows no time
remaining but the oven
door will not open.
I have cancelled Self Clean
but cannot use the oven:
• the door will not open
• the screen is still
counting down or
showing no time
remaining
• the controls are
unresponsive
The oven screen shows A2
or A3.
There is a power cut
during Self Clean.
Excessive smoking and/
or flames inside the oven
during a CLEAN cycle.
Brief glowing inside the
oven during SELF CLEAN.
The dial halos on the
secondary oven flash
white
The dial halos on the main
oven flash red
The oven door won't open
TROUBLESHOOTING
POSSIBLE CAUSES
This is normal: the oven's cooling
fans operate at their highest speed.
The oven door is locked because
the oven is still too hot to be used
for cooking.
This is normal.
If the oven is still too hot to be
used for cooking the door will stay
locked until it has cooled down.
See section 'Alert codes' for
instructions.
Power cut.
Combustible material (eg wooden
board or utensil) or excessive food
soils left in the oven.
Heavy soiling is being removed
is running in the main
SELF CLEAN
oven
The secondary oven is in use
The door is locked because
cycle is underway or the
CLEAN
oven has not yet cooled.
WHAT TO DO
Wait until Self Clean has finished.
If you cancelled a cycle part way
through, the oven
still needs to cool down before it
can be used. The oven door will
automatically unlock.
Wait until the cool-down phase
has finished. A long tone will
sound and the oven door will
automatically unlock when the
oven is ready to use.
Depending on when the clean
cycle was cancelled, the cool-down
may take up to 45 minutes.
Follow the instructions on the
screen.
The heating elements are
disabled while the door is open.
The door will remain locked until
the oven has cooled to a safe
temperature.
Follow the instructions under 'Self
Clean' Do not disconnect the range
from the power supply at the
circuit breaker. The cooling fan is
needed to cool the range.
This is normal and requires no
action.
Wait until the
finished or follow the instructions
in 'self clean'.
A
SELF CLEAN
when the secondary oven is in use.
Turn the the dials of the secondary
oven to
OFF
See instructions in
SELF
cycle has
SELF CLEAN
cycle cannot run
.
'self clean'.
71