First Use - Fisher & Paykel RDV3 User Manual

Replace shelving in your preferred positions
10

FIRST USE

Shelf positions
Always position the oven shelves before
turning the oven on. Remove any unused
shelves and baking utensils from the oven.
For advice on which shelf position to use,
see sections 'Cooking charts'.
Replacing the shelves
1 Grip the shelf at the front (ensuring you
Guard rail
2 Ensure the shelf is level and facing the
Front bar
3 Place the shelf on top of the side racks
4 Push the shelf all the way into the oven,
Ensure sliding shelves are positioned on top
of the side rack wires instead of between
them.
The wire shelves and slides are built together
as one unit. When positioned correctly, the
slides will prevent the wire shelves from
tilting when pulled forward.
are holding the wire shelf and the sliding
frame together).
right way with the guard rail at the back.
at the desired height, hooking the rear
tags over the side racks on both sides.
making sure the front tags are also
securely hooked over the side racks.