Table of Contents
Advertisement
Raising the Roll Bar
Important:
Always use the seat belt with the roll
bar in the raised position.
1.
Remove the hairpin cotters and remove the 2
pins
(Figure
5).
2.
Raise the roll bar to the upright position, install
the 2 pins, and secure them with the hairpin
cotters
(Figure
5).
1. Roll bar
2. Raised position
Figure 5
3. Pin
4. Hairpin cotter
Maintenance
Checking the Seat Belt
Service Interval: Before each use or daily
Inspect the seat belt for wear, cuts, and proper
operation of the retractor and buckle. Replace the
seat belt if it is damaged.
g004955
7
Advertisement
Table of Contents
