Table of Contents
Advertisement
synchronization of wheel alignment should
occur.
Important:
Doing this procedure on turf
can result in turf directly under each of the
turning tires.
Cooling System
Maintenance
Cooling System Safety
•
Swallowing engine coolant can cause
poisoning; keep out of reach from children and
pets.
•
Discharge of hot, pressurized coolant or touching
a hot radiator and surrounding parts can cause
severe burns.
– Always allow the engine to cool at least 15
minutes before removing the radiator cap.
– Use a rag when opening the radiator cap, and
open the cap slowly to allow steam to escape.
Checking the Cooling
System
Service Interval: Before each use or daily
DANGER
The rotating fan and drive belt can cause
personal injury.
• Do not operate the machine without the
covers in place.
• Keep your fingers, hands and clothing
clear of rotating fan and drive belt.
• Shut off the engine and remove the key
from the key switch before performing
maintenance.
The cooling system is filled with a 50/50 solution
of water and permanent ethylene glycol anti freeze.
Check the level of the coolant in the expansion tank at
the beginning of each day before starting the engine.
The capacity of the cooling system is 7.5 L (6 US qt).
1. Check the level of the coolant in the expansion
tank
(Figure
69). The coolant level should be
between the marks on the side of the tank.
2. If coolant level is low, remove the expansion tank
cap and replenish the system. Do not overfill.
55
Advertisement
Table of Contents
