Maintenance; Recommended Maintenance Schedule(S); Preparing For Maintenance; Cleaning The Hood Screen - Toro 79348 Manual

Maintenance

Note:
Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After each use
Every 25 hours
Every 100 hours
WARNING
If you leave the key in the key switch, someone could accidently start the machine and
seriously injure you or other bystanders.
Remove the key and disconnect the wire from the spark plug before you do any maintenance.
Set the wire aside so that it does not accidentally contact the spark plug.
WARNING
Engines can become hot when they are operating. Severe burns can occur from contacting hot
surfaces.
Allow engines, especially the muffler, to cool before touching.
WARNING
Debris, such as leaves, grass, or brush can catch fire. A fire in the engine area can cause
personal injury and property damage.
• Keep the engine and muffler area free of debris accumulation.
• Take care when opening the bagger cover to keep debris from falling onto the engine and
muffler area.
• Allow the machine to cool before storing it.

Preparing for Maintenance

Do the following steps before preforming maintenance
on the machine:
1. Park the machine on a level surface.
2. Disengage the PTO and move the motion control
levers to the
NEUTRAL
3. Shut off the machine and remove the key.
4. Clean the mower of any debris on the deck or
rear part of the mower to ease maintenance.
Maintenance Procedure
• Inspect the blower belt.
• Inspect the bagger.
• Clean the hood screen.
• Clean the bagger.
• Inspect the blower belt.
• Inspect the bagger.
- position.
LOCK

Cleaning the Hood Screen

Service Interval: After each use
1. Open the bagger hood.
2. Clean the debris from the screen.
3. Close the bagger hood.
25