Table of Contents
Advertisement
N
position with the parking brake engaged. If
EUTRAL
you rise from the seat when the PTO is engaged, there
is a 1-second delay and then the engine shuts off.
Testing the Safety-Interlock
System
Service Interval: Before each use or daily
Test the safety interlock system before you use the
machine each time. If the safety system does not
operate as described below, have an Authorized
Service Dealer repair the safety system immediately.
1. Sitting on the seat, engage the parking brake
and move the PTO to the O
starting the engine; the engine should not start.
2. Sitting on the seat, engage the parking brake
and move the PTO to the
the traction pedal. Try starting the engine; the
engine should not start.
3. Sitting on the seat, engage the parking brake,
move the PTO switch to the
allow the traction pedal to return to the N
position. Now start the engine. While the engine
is running, disengage the parking brake, engage
the PTO and rise slightly from the seat. On
2-wheel-drive machines, the engine should stop
within 2 seconds. On 4-wheel-drive machines,
the mower deck shuts off and the engine
continues to run.
4. Without sitting on the seat, engage the parking
brake, move the PTO switch to the
and move the traction pedal to the N
position. Now start the engine. While the engine
is running, press the traction pedal; the engine
should shut off within 2 seconds.
5. Without an operator on the seat, disengage the
parking brake, move the PTO switch to off, and
allow the traction pedal to return to the N
position. Try starting the engine; the engine
should not start.
position. Try
N
position. Press
OFF
position, and
OFF
EUTRAL
position,
OFF
EUTRAL
EUTRAL
Positioning the Standard
Seat
Changing the Seat Position
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
1. To adjust the seat, move the lever sideways to
unlock the seat
1. Backrest knob
2. Seat-suspension knob
2. Slide the seat to the desired position and release
the lever to lock the seat in position.
3. Verify that the seat has locked into place by
attempting to move it back and forth.
Changing the Seat Suspension
You can adjust the seat to provide a smooth and
comfortable ride. Position the seat where you are
most comfortable.
Without sitting on the seat, turn the knob in front in
either direction to provide the best comfort
24
(Figure
17).
Figure 17
3. Lumbar-support-adjustment
knob
4. Seat-position-adjustment
lever
(Figure
g004478
17).
Advertisement
Table of Contents
