Safety; General Safety; Safety And Instructional Decals - Toro 31200 Operator's Manual

Safety

This machine has been designed in accordance with
EN ISO 5395:2013 and ANSI B71.4-2012.

General Safety

This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.
Using this product for purposes other than its intended
use could prove dangerous to you and bystanders.
•
Read and understand the contents of this
Operator's Manual before starting the engine.
•
Do not put your hands or feet near moving
components of the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
working on the machine.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Stored energy hazard—read the Operator's Manual.
1. Rotating belt—keep guard in place.
93-6696
117-4979
•
Keep clear of any discharge opening. Keep
bystanders and pets a safe distance away from
the machine.
•
Keep children out of the operating area. Never
allow children to operate the machine.
•
Stop the machine and shut off the engine before
servicing, fueling, or unclogging the machine.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always pay
attention to the safety-alert symbol, which means
Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
You can find additional safety information where
needed throughout this Operator's Manual.
decal93-6696
1. Engine coolant under
pressure
2. Explosion hazard—read
the Operator's Manual.
decal117-4979
4
117-3276
3. Warning—do not touch the
hot surface.
4. Warning—read the
Operator's Manual.
decal117-3276