Lubrication
Greasing the Bearings and Bushings
Service Interval: Every 50 hours Grease the bearing and bushing grease fittings more frequently in extremely
dusty and dirty conditions.
The machine has grease fittings that you must lubricate regularly with No. 2 lithium grease. Lubricate the
grease fittings immediately after every washing, regardless of interval specified.
1. Wipe the grease fittings clean so that foreign matter cannot be forced into the bearing or bushing
53).
2. Pump the grease into the fittings.
3. Wipe off any excess grease.
Figure 53
Shown with mower deck installed
46
(Figure
g004645