Table of Contents
Advertisement
4. Add fuel to the fuel tank until the level is even
with the bottom of the filler neck. Do not overfill
the fuel tank.
5. Install the fuel-tank cap and secure. Wipe up
any spilled fuel.
Checking the Engine-Oil
Level
Before you start the engine and use the machine,
check the oil level in the engine crankcase; refer to
Checking the Engine-Oil Level (page
Checking the Cooling
System
Before you start the engine and use the machine,
check the cooling system; refer to
Cooling System (page
Checking the Hydraulic
System
Before you start the engine and use the machine,
check the hydraulic system; refer to
Hydraulic System (page
49).
Checking the
55).
Checking the
60).
Think Safety First
Please read all safety instructions and symbols in the
safety section. Knowing this information could help
you or bystanders avoid injury.
CAUTION
This machine produces sound levels in
excess of 85 dBA at the operator's ear and
can cause hearing loss through extended
periods of exposure.
Wear hearing protection when operating this
machine.
1
1. Warning— wear eye
protection.
Using the Safety-Interlock
System
CAUTION
If the safety-interlock switches are
disconnected or damaged the machine could
operate unexpectedly and cause personal
injury.
• Do not tamper with the interlock switches.
• Check the operation of the interlock
switches daily and replace any damaged
switches before operating the machine.
Understanding the
Safety-Interlock System
The safety-interlock system is designed to prevent the
engine from starting unless the following occurs:
•
You are sitting on the seat or the parking brake
is engaged.
•
The power takeoff (PTO) is disengaged.
•
The traction pedal is in the N
•
The engine temperature is below the maximum
operating temperature.
The safety-interlock system also is designed to shut
off the engine when the traction pedal moves from the
23
G009027
Figure 16
2. Warning— wear hearing
protection
position.
EUTRAL
2
g009027
Advertisement
Table of Contents
