Table of Contents
Advertisement
SECTION 2 – OPTIVIEW CONTROL CENTER
FIGURE 47 - CUSTOM VIEW SETUP SCREEN
This screen allows the Service technician to select
up to 10 parameters for display on the Custom View
Screen.
R e q u i r e s a l o g i n a c c e s s l e v e l o f
SERVICE.
DISPLAY ONLY
Slot Numbers
Lists the available parameters that can be displayed.
The desired parameters for display are selected from
this list.
PROGRAMMABLE
Page Up
Scroll up through list of available parameters.
Page Down
Scroll down through list of available parameters.
Select
First use the Page Up and Page Down keys to scroll
through the Slot Numbers list and note the number of
the parameters to be displayed. Pressing the Select key
118
CUSTOM VIEW SETUP
places a green colored selection box around Custom
Slot 1. If it is desired to change an already entered pa-
rameter, use the 5 and 6 keys to place the selection
box around the slot number to be changed. With the
selection box around the slot number to be changed or
entered, press the ENTER (3) key. A dialog box is dis-
played permitting data entry. Using the numeric key-
pad keys, enter the desired slot number and press the
ENTER (3) key.
Custom Slot (1-10)
Use the Select key and numeric keypad keys as de-
scribed above and enter the slot number from Slot
Numbers list. Setting the Slot number to zero clears
the display of this slot number.
Clear Display
Pressing this key clears all selected parameters from
the Custom View screen.
NAVIGATION
Home
Access Level Required: VIEW
Causes a return to the Home Screen.
Custom View
Access Level Required: SERVICE
Causes a return to the Custom View Screen.
FORM 160.79-O3
ISSUE DATE: 11/09/2018
00325VIPC
JOHNSON CONTROLS
Advertisement
Table of Contents
