Security Log Screen; Figure 44 - Security Log Screen - York OPTIVIEW YD Series Manual

FORM 160.79-O3
ISSUE DATE: 11/09/2018

FIGURE 44 - SECURITY LOG SCREEN

This screen displays a listing of the last 75 setpoint
changes. They are listed and numbered in reverse or-
der in which they were changed, with the most recent
listed as number 1. Multiple pages are necessary to dis-
play all 75 changes. Not all setpoints are logged.
The details of any setpoint change can be viewed by
navigating to a subscreen that displays the date and
time of the change, Access Level and USER ID used
to make the change, the old setpoint value and the new
setpoint value.
Requires a login access level of SER-
VICE.
DISPLAY ONLY
Category
Displays the category of the setpoint (motor, evapora-
tor, condenser, and so on).
Setpoint
Displays the setpoint that was changed.
New Value
Displays the value that was entered at the time of the
setpoint change.
JOHNSON CONTROLS

SECURITY LOG SCREEN

PROGRAMMABLE
Log Entry
Allows the user to select a particular setpoint change
for detail viewing.
Print
Generates a detailed report of all setpoint changes list-
ed in the setpoint change log.
Page Up
Scroll up in the displayed data (if applicable).
Page Down
Scroll down in the displayed data (if applicable).
NAVIGATION
Home
Access level Required: SERVICE
Causes an instant return to the Home Screen.
History
Access Level Required: SERVICE
Causes an instant return to the History Screen.
View Details
Access Level Required: SERVICE
Causes a move to a subscreen containing the details of
the setpoint change selected with the Log Entry key.
SECTION 2 – OPTIVIEW CONTROL CENTER
2
00662VIPC
115