Table of Contents
Advertisement
SECTION 2 – OPTIVIEW CONTROL CENTER
FIGURE 39 - PRINTER SCREEN
This screen allows definition of the necessary com-
munications parameters for the printer. See SECTION
3 – PRINTERS for details of the Printer connections
and setup.
DISPLAY ONLY
Time Remaining Until Next Print
Displays the time until the next print log will occur, if
the function is enabled.
PROGRAMMABLE
Automatic Printer Logging (Enabled / Dis-
abled)
Access Level Required: OPERATOR
Enable the printer to begin printing status reports be-
ginning at the programmed start time and recurring at
the interval defined above.
Log Start Time
Access Level Required: OPERATOR
Set the time at which scheduled print logs will begin.
106
PRINTER SCREEN
Output Interval
Access Level Required: OPERATOR
Define the interval at which log printing will occur be-
tween 1 and 1440 minutes.
Printer Type
Access Level Required: OPERATOR
Define the printer type connected to the chiller system.
Print Report
Access Level Required: VIEW
Selects the report type to print: Status, Setpoints,
Schedule, Sales, Slots, or Custom report. A print report
is generated upon completion of selection.
Print All Histories
Access Level Required: VIEW
Generate a report of the system data at the time of all
stored shutdowns.
Export All Waveforms
Access Level Required: VIEW
Generates a file that can be read into a PC running Ex-
cel to view the VSD waveforms.
FORM 160.79-O3
ISSUE DATE: 11/09/2018
LD27878
JOHNSON CONTROLS
Advertisement
Table of Contents
