Sales Order Screen; Figure 40 - Sales Order Screen - York OPTIVIEW YD Series Manual

SECTION 2 – OPTIVIEW CONTROL CENTER

FIGURE 40 - SALES ORDER SCREEN

This screen displays the sales order parameters. The
Commissioning date is entered by the YORK Service
Technician at the time of chiller commissioning. The
remainder of the values are entered at the YORK Fac-
tory during the manufacturing of the chiller.
DISPLAY ONLY
Commissioning Date
Displays the date when the chiller was commissioned.
Job Name and Location
Displays the job name and location.
Model Number
Displays the chiller model number.
YORK Order Number
Displays the order number under which the chiller was
sold.
Panel Serial Number
Factory-defined serial number for the micropanel.
Chiller Serial Number
Factory-defined serial number for the chiller system.
108

SALES ORDER SCREEN

Condenser and Evaporator Design Load
Information
Factory-defined description of the condenser and evap-
orator configuration at time of shipment.
Nameplate Information
Factory-defined information about the chiller motor
configuration. The Full Load and Inrush Amps is the
value for each motor.
System Information
Factory-defined conditions for which the chiller was
originally rated and sold. The Kilowatts Input is the
total for the chiller.
PROGRAMMABLE
None.
Print
Access Level Required: VIEW
This generates a listing of the Sales Order data.
FORM 160.79-O3
ISSUE DATE: 11/09/2018
LD27879
JOHNSON CONTROLS