Table of Contents
Advertisement
FORM 160.79-O3
ISSUE DATE: 11/09/2018
FIGURE 37 - USER SCREEN
This screen allows the Operator to choose what units
of measurement to display parameters in, the screen
languages, and the date format.
Each Custom User value is not linked to a specific but-
ton. Instead, the Change button is pressed which en-
ables the cursor arrows which are used to highlight the
Custom User parameter the user wishes to modify. At
this point the 'a' (Check) button is pressed and the
value may be entered.
DISPLAY ONLY
None
PROGRAMMABLE
System Language
Access Level Required: OPERATOR
Allows the user to define the language for all Screens.
The desired language is selected by scrolling through
the list of those available. English is the Default lan-
guage and is selected by pressing the Up Arrow key
when the dialog box appears during the selection pro-
cess. The selected language will not be displayed un-
til after the user navigates from the USER Screen to
JOHNSON CONTROLS
USER SCREEN
another Screen. Available languages are English, Tra-
ditional Chinese, Simplified Chinese, French, Portu-
guese, Spanish, Italian, German, Hungarian, and Turk-
ish.
English / Metric Units
Access Level Required: OPERATOR
Define the unit system (English or Metric) used by the
chiller display.
Custom User ID (4)
Access Level Required: SERVICE
This allows the user to specify up to four (4) Custom
User ID values. Each user ID will then require a cor-
responding Password and User Level. A User ID can
be defined for various maintenance personnel. Service
Technicians refer to Service Manual (Form 160.79-
M1).
Custom User Password (4)
Access Level Required: SERVICE
This allows the user to specify up to four (4) Custom
Password values. Each Password will then require a
corresponding User ID and User Level. Service Tech-
nicians refer to Service Manual (Form 160.79-M1).
SECTION 2 – OPTIVIEW CONTROL CENTER
2
LD27876
103
Advertisement
Table of Contents
