History Screen; Figure 42 - History Screen - York OPTIVIEW YD Series Manual

SECTION 2 – OPTIVIEW CONTROL CENTER

FIGURE 42 - HISTORY SCREEN

This screen allows the user to browse through the
faults. In order to get a more thorough reporting of
the system conditions at the time of the recorded shut-
down, move to the subscreen HISTORY DETAILS.
The user may use the Select Fault button to select the
history to view. At this point the View Details button
is used to jump to a subscreen containing stored chiller
parameters values at the time of the shutdown. Addi-
tionally, the Print History button can be used to gen-
erate a hard-copy report of the parameter values at the
time of the shutdown.
DISPLAY ONLY
Last Normal Shutdown
This window displays the date and time and the de-
scription of the last normal shutdown. A normal shut-
down is defined as:
• Local (Start Key on Home screen)
• Remote (Digital, Analog, or ISN)
112

HISTORY SCREEN

Last Fault While Running
This window displays the date and time and the de-
scription of the last safety or cycling shutdown while
the system was running.
Last Fifty Faults
This window displays a chronological listing (most
recent first) of the date and time and the description
of the last ten safety or cycling shutdowns that occur
while the system is running or stopped.
PROGRAMMABLE
Print History
Access Level Required: VIEW
This generates a report listing the status of the chiller
parameters at the time of the selected shutdown.
Print All Histories
Access Level Required: VIEW
This generates a report listing the status of the chiller
parameters at the time of each of the stored shutdowns.
FORM 160.79-O3
ISSUE DATE: 11/09/2018
LD27881
JOHNSON CONTROLS