Figure 33 - Custom Setup Screen - York YZ MODEL A Operation And Maintenance Manual

SECTION 3 - OPTIVIEW™ CONTROL CENTER FUNCTIONS AND NAVIGATION

FIGURE 33 - CUSTOM SETUP SCREEN

This screen allows the Service technician to select up to
10 parameters for display on the Custom View Screen.
DISPLAY ONLY FIELDS
FIELD/LED NAME
Slot Numbers
PROGRAMMABLE
BUTTON ACCESS LEVEL
Page Up Operator
Page Down Operator
Select Operator
Custom Slot
Operator
(1-10)
78
DISPLAY ONLY FIELDS
Lists the available parameters that can be displayed. The desired parameters for
display are selected from this list.
PROGRAMMABLE
Scroll up through list of available parameters.
Scroll down through list of available parameters.
First use the Page Up and Page Down keys to scroll through the Slot Numbers
list and note the number of the parameter(s) to be displayed. Pressing the Select
key places a green colored selection box around Custom Slot 1. If it is desired to
change an already entered parameter, use the 5 and 6 keys to place the selec-
tion box around the slot number to be changed. With the selection box around
the slot number to be changed or entered, press the ENTER (
box is displayed permitting data entry. Using the numeric keypad keys, enter the
desired slot number and press the ENTER (
Use the Select key and numeric keypad keys as described above and enter
the slot number from Slot Numbers list. Setting the Slot number to zero
clears the display of this slot number.
LD26754
DESCRIPTION
DESCRIPTION

) key.
FORM 161.01-OM1
ISSUE DATE: 6/8/2018

) key. A dialog
JOHNSON CONTROLS