Custom View Setup - York YD Mod D Operation Manual

Custom view setup

Figure 50: Custom view setup screen
This screen allows the service technician to select up to 10 parameters for display on the Custom
View screen.
Note: Requires a login access level of SERVICE.
Table 124: Display only fields
Field/LED name
Slot numbers
Table 125: Programmable
Button Access level
Page up Service
Page down Service
Custom slot
Service
(1-10)
Select Service
Clear display Service
Table 126: Navigation
Button Access level
Home View
Custom view Service
Model YD Mod D with OptiView Control Center
Description
Lists the available parameters that can be displayed. The desired parameters for
display are selected from this list.
Description
Scroll up through list of available parameters.
Scroll down through list of available parameters.
Use the Select key and numeric keypad keys as described above and enter the slot
number from Slot Numbers list. Setting the Slot number to zero clears the display of
this slot number.
First use the Page Up and Page Down keys to scroll through the Slot Numbers list and
note the number of the parameters to be displayed. Pressing the Select key places a
green colored selection box around Custom Slot 1. If it is desired to change an already
entered parameter, use the 5 and 6 keys to place the selection box around the slot
number to be changed. With the selection box around the slot number to be changed
or entered, press the ENTER key. A dialog box is displayed permitting data entry. Using
the numeric keypad keys, enter the desired slot number and press the ENTER key.
Pressing this key clears all selected parameters from the Custom View screen.
Description
Returns to the Home screen.
Returns to the Custom View screen.
117