Custom View Setup; Figure 42 - Custom View Setup Screen - York YD Series Operation Manual

SECTION 2 – OPTIVIEW CONTROL CENTER
Overview
This screen allows the Service technician to select up to
10 parameters for display on the Custom View Screen.
Requires a login access level of SER-
VICE. Service Technicians refer to YORK
Service Manual 160.69-M1 for opera-
tion instructions and explanation of all
programmable setpoints and displayed
values.
Display Only
Slot Numbers
Lists the available parameters that can be displayed.
The desired parameters for display are selected from
this list.
Programmable
Page Up
Scroll up through list of available parameters.
Page Down
Scroll down through list of available parameters.
Select
First use the Page Up and Page Down keys to scroll
through the Slot Numbers list and note the number of
the parameter(s) to be displayed. Pressing the Select

FIGURE 42 - CUSTOM VIEW SETUP SCREEN

106

CUSTOM VIEW SETUP

key places a green colored selection box around Cus-
tom Slot 1. If it is desired to change an already entered
parameter, use the 5 and 6 keys to place the selection
box around the slot number to be changed. With the
selection box around the slot number to be changed or
entered, press the ENTER (3) key. A dialog box is dis-
played permitting data entry. Using the numeric key-
pad keys, enter the desired slot number and press the
ENTER (3) key.
Custom Slot (1-10)
Use the Select key and numeric keypad keys as de-
scribed above and enter the slot number from Slot
Numbers list. Setting the Slot number to zero clears
the display of this slot number.
Clear Display
Pressing this key clears all selected parameters from
the Custom View screen.
Navigation
Home
Access Level Required: VIEW
Causes a return to the Home Screen.
Custom View
Access Level Required: SERVICE
Causes a return to the Custom View Screen.
FORM 160.69-O1
ISSUE DATE: 9/30/2012
00325VIPC
JOHNSON CONTROLS