Track Color - Furuno NavNet TZtouch3 Series Operator's Manual

2. CHART PLOTTER
For distance-based intervals
1. Open the home screen, then tap [Settings]→[Ship & Track].
2. Tap [Track Interval]→[Distance], then tap "<" to go back one layer in the menu.
3. Tap [Distance Interval]. The software keyboard appears.
4. Input the desired interval, then tap [ ].
5. Tap the close button to finish.
2.11.4

Track color

Track can be displayed in a single color or multiple colors. For multiple colors, you can
display the track according to one of the conditions shown below.
- Depth
- SST Variation
- Bottom Discrimination
Note: The bottom discrimination method requires a bottom discrimination capable
transducer connected to the bottom discrimination sounder BBDS1, or network
sounder DFF1-UHD.
From the home screen
1. Open the home screen, then tap [Settings]→[Ship & Track].
2. Tap [Track Color].
3. Tap [Fixed] or [Variable]. Tap "<" to go back one layer in the menu. For [Fixed],
go to the next step. For [Variable], go to step 5.
4. Tap [Fixed Color Setup] then tap a color. Go to step 10.
5. Tap [Variable Color] then tap an option.
[Depth]: Change the color of the track with depth.
[SST Range]: Change the color of the track with change in sea surface tempera-
ture.
2-20
- SST Range
- Speed
- Depth Variation