Furuno NavNet TZtouch3 Series Operator's Manual page 17

Multi function display
Hide thumbs Also See for NavNet TZtouch3 Series:
Table of Contents

Advertisement

• Able to write and read data (points, routes, tracks, etc.) using a micro SD card.
• Built in GPS receiver and antenna. (TZT12F/TZT16F only)
• AIS function (requires connection of AIS transponder) receives AIS data from AIS equipped
vessels, shore stations and navigational aids and displays relevant data.
• Built in fish finder available with single or dual frequency transducer.
• ACCU-FISH
provides at-a-glance estimation of length and depth of individual fish. (Requires
ACCU-FISH
capable transducer.)
• Bottom discrimination display helps identify probable bottom composition with graphics and col-
ors. (Requires bottom discrimination display capable transducer.)
• RezBoost
raises echo resolution to see fish echoes clearly. (Requires RezBoost
transducer. Not available when the transducer is installed with the inside hull installation meth-
od.)
• CHIRP transducer provides high resolution, low-noise pictures of underwater conditions.
• Dual-range radar display for watch on short and long distances at the same time.
• DSC (Digital Selective Calling) message information feature provides the MMSI no. and posi-
tion of vessels that have transmitted a DSC message to you. (Requires DSC capable radiotele-
phone.)
• Control audio of FUSION-Link
• HDMI output (type A receptacle).
• Monitoring of the inside/outside of your ship via analog camera (FLIR
• Monitoring around the vessel with pan-tilt-zoom capable (PTZ) cameras (FLIR
• HDMI input and USB touch output for control of external application. (TZT16F, TZT19F)
Software used in this product
This equipment uses the following open source software.
• Ubiquitous QuickBoot Copyright
• This product includes software to be licensed under the GNU General Public License (GPL) ver-
sion 2.0, GNU Lesser General Public Software License (LGPL) version 2.0, Apache, BSD and
others. The program(s) is/are free software(s), and you can copy it and/or redistribute it and/or
modify it under the terms of the GPL version 2.0 or LGPL version 2.0 as published by the Free
Software Foundation. Please access to the following URL if you need source codes: https://
www.furuno.co.jp/contact/cnt_oss01.html.
Program no.
System: 1950212-01.**
Application: 1950213-01.**
** denotes minor modifications.
CE declaration
With regards to CE declarations, please refer to our website (www.furuno.com), for further infor-
mation about RoHS conformity declarations.
equipment.
©
Ubiquitous Corp. All rights reserved.
FOREWORD
capable
, AXIS
).
, AXIS
).
xv

Advertisement

Table of Contents
loading

This manual is also suitable for:

Navnet tztouch3 tzt12fNavnet tztouch3 tzt16fNavnet tztouch3 tzt19f

Table of Contents