Default Event Mark Settings - Furuno NavNet TZtouch3 Series Operator's Manual

4. POINTS, BOUNDARIES
6. To change point size. operate the slider bar or software keyboard at [Point Size]
7. Tap [Icons Set] to select the icons set to use.
8. Select [Modern] or [Classic], referring to the figure below.
[Modern] point [Classic] point
9. Tap the close button on the title bar to finish.
4.5.2

Default event mark settings

1. Go to the Home screen, then tap [Settings]→[Points & Boundaries].
2. Tap [Default Event Mark 1 Symbol].
3. Tap required symbol, then tap [<] to return one layer in the menu.
4. Tap [Default Event Mark 1 Color] to show the color options for points.
5. Tap required color, then tap [<] to return one layer in the menu.
4-7