Points, Boundaries; About Points & Event Marks - Furuno NavNet TZtouch3 Series Operator's Manual

4.

POINTS, BOUNDARIES

4.1 About Points & Event Marks
In navigation terminology, a point is any location you mark on the chart plotter, radar,
sounder or weather display. A point can be a fishing spot, reference point or other im-
portant location. You can use a point you have entered to set as a destination.
This unit has 30,000 points (including event marks and MOB marks) into which you
can enter position information.
A point is used to mark a location. When you enter a point, it is put on the screen with
the default point icon (see section 4.5.1), as shown in the figure below.
(chart plotter, radar and weather displays
The event mark marks current position. Like with a point, you can use an event mark
to set a destination.
For the TZT12F, the event mark is entered with the
EVENT/MOB key, and is marked on the screen with the
default event mark icon. See section 4.5.2.
A point or event mark is saved to the [Points] list with po-
sition, color, shape, etc. In the default setting, all points
and event marks are shown on the display
You can edit points and event marks on the screen and
from the [Points] list.
Note 1: Event marks are handled the same as points.
Note 2: Points can be shared with other NavNet TZtouch3 units via LAN. Data is
shared automatically; no operation is required.
Default point icon
(black circle in yellow circle)
Default point icons for
fish fish finder display
Default event mark icons
4-1