Furuno NavNet TZtouch3 Series Operator's Manual page 24

1. SYSTEM INTRODUCTION
Notes on touchscreen operations
• Waterdrops on the screen can cause mis-operation and slow touch response. Wipe
the screen with a dry cloth to remove the water.
• This equipment uses a capacitive touch screen. Tap the screen with your fingertips
directly. Do not use sharp objects (needle, pen, nail) or a stylus pen. Be careful not
to scratch the screen.
• Touchscreen may be reduced when wearing gloves.
• Do not put objects (adhesive-backed paper, etc.) on the screen. Mis-operation can
result.
• Keep the equipment away from radio antennas, fluorescent lights, solenoid valves
and electronic devices to prevent unintended operation cause by electrical noise.
• The front panel is made of glass. If the front panel is damaged, do not try to repair
it yourself. Unauthorized repair will void the warranty. Contact your dealer about re-
pair or replacement.
• The touch screen can be locked to prevent operation of the equipment. See the pro-
cedure below.
How to lock the touch screen
The touch screen can be locked to prevent unintentional operation.
With the power applied, press
Screen] icon.
When the screen is locked, a small padlock-shaped icon appears at the [Home] button
position, at the top-left of the screen, as shown in the figure below.
1-4
DRS6A_X-CLASS BBDS1
Touch Screen
Device Network
Home
Locked
to show the [Quick Access] window. Tap the [Touch
Home
Unlocked