How To Edit The Display Icons; How To Add A New Display Icon - Furuno NavNet TZtouch3 Series Operator's Manual

1. SYSTEM INTRODUCTION
1.7

How to Edit the Display Icons

The default Home screen arrangement provides display icons in a configuration ac-
cording to the equipment that you have in your network. If the arrangement does not
meet your requirements, you can rearrange the icons to suit your needs. You can have
a maximum of 16 display icons, and a screen can be shown in full screen, 2-way, 3-
way or 4-way split screens.
Note: Some displays cannot be shown in multi-split screens. An icon is greyed out
when it cannot be selected to a multi-split screen. See section 1.7.1.
The displays available depend on the display division selected and your system con-
figuration. The table below outlines the display divisions and available displays.
Display division
Full screen
Two-way split
Three-way, four-way
split
* Not available in left-side screen in a three-way split screen.
1.7.1

How to add a new display icon

1. Tap the [Home] icon to show the Home screen.
2. Tap the + icon, shown right. (If the icon is not shown, this means
that all available display icons (16) have been used. Erase an
unnecessary icon to make room. See subsection 1.7.2.)
3. Follow the instructions below to create a display icon.
Display
division
choices
Available displays (Unavailable displays are greyed out)
In the three-way split screen, unavailable displays are
denoted by showing "
display (icon).
After saving, the arrangement is then opened on the screen and the display icons on
the Home screen are updated according to your arrangement.
1-18
Plotter, weather, radar, fish finder, instrument, camera, multi beam
sonar, side scan, cross section, 3D history, Yamaha Engine Manag-
er
Plotter, radar, fish finder, multi beam sonar, side scan
Plotter, radar, fish finder, instrument*, camera*, multi beam sonar,
side scan, cross section*, 3D history*, Yamaha Engine Manager
Custom display area Custom display area
Drag display Drag display
division icon to division icon to
screen center. screen center.
" when dragging the unavailable
Available displays
Tap to save icon.
Drag display type Drag display type
(icon) to screen (icon) to screen
center. center.
Display
choices