Furuno NavNet TZtouch3 Series Operator's Manual page 27

Multi function display
Hide thumbs Also See for NavNet TZtouch3 Series:
Table of Contents

Advertisement

No.
Key
8
Joystick
9
EDGE key
10
CANCEL/MOB key
* The beep sound can be turned on or off with [Notify when NAVpilot is engaged] in
the menu. See section 2.10.8.
Short push: Works same as tap gesture.
• Opens the pop-up menu.
• Activates the item selected by the cursor.
Long push: Works same as long tap gesture.
• Enables editing of display icons.
Joystick operation:
Cursor mode operation: Moves the cursor.
Scroll mode operation:
• Pans the display (Plotter/Weather/Radar display).
• Shifts the range and scrolls back the picture (Fish finder display).
• Activates selected item.
• Press ENT key followed by joystick operation: Opens [Layers]
menu, Quick Page, Slide-out menu, Data Area.
Opens Layers menu
Push
Push
Push
Opens Slide-out menu
Push
Push
Push
Short push:
• Closes the menu or dialog box.
• Stops the aural alarm.
• Ends the tool mode (End Route, End Move, etc.).
Long push:
• Enters the MOB mark (at the own ship's position).
1. SYSTEM INTRODUCTION
Function
Opens Quick Page
Push
Push
Push
Opens Data Area
Push
Push
Push
1-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Navnet tztouch3 tzt12fNavnet tztouch3 tzt16fNavnet tztouch3 tzt19f

Table of Contents