Furuno NavNet TZtouch3 Series Operator's Manual page 287

• Change the format: Tap [Change Type] to show the pop-up menu shown be-
low. Choose the format and size.
The format choices are [GRAPHIC]
WAY], and [NAVPILOT]
[Large].
*1 Graph cannot be displayed for engine or tank data.
*2
Displayed with connection of a tank sensor and [MANUAL FUEL TANK] is set
to [ON]. See subsection 12.5.1
*3
Requires connection of FURUNO NAVpilot.
• Change graph plotting time (horizontal axis): Tap [Plot Period]* to change
the time over which the graph's data is plotted.
* Depending on the display time, the number of data points displayed on the
graph may be reduced, and the graph may be coarse.
• Change graph plotting range (vertical axis): Tap [Plot Range Value] to
change the range for the data display in the graph. Tap [ ] to finish and close
the keyboard.
12. INSTRUMENT-RELATED DISPLAYS
*1
, [NUMERIC]
*3
and the available sizes are [Small], [Medium], and
*2
, [GRAPH], [TANK], [HIGH-
12-13