Remote Control Units (Option); Remote Control Mcu-002 - Furuno NavNet TZtouch3 Series Operator's Manual

1.2

Remote Control Units (option)

The Remote Control Units let you operate the system without touching the screen.
When the power is applied and a Remote Control Unit is connected, an orange cursor
(selection cursor) marks current selection in menus.
1.2.1

Remote Control MCU-002

1 2 3
5
6
7
9
8
No. Key
5 +, - key
6 ENT key
No. Key
1 STBY•AUTO
key
2 CENTER key
4
3 CURS•SCRL
key
4 Joystick
• Selects an item from the slide-out/main/pop-up menu.
• Zooms in (+) and out (-).
• Activates selected item.
• Press ENT key followed by joystick operation: Opens [Layers] menu,
Quick Page, Slide-out menu, Data Area.
Opens Layers menu
ENT
Opens Slide-out
ENT
Switches the steering mode of the FURUNO
NAVpilot series Autopilot between the Stand-
by and AUTO modes. When switching occurs,
a beep sounds* and a message informs you of
Navpilot mode change.
• Stand-by mode→AUTO mode: "Navpilot
Engaged".
• AUTO mode→Stand-by mode: "Navpilot
Disengaged".
• Returns own ship to the center of the
screen (Plotter/Weather/Radar display).
• Cancels the echo history (Fish finder dis-
play).
Switches the joystick gesture between the
cursor mode and scroll mode.
Short push: Works the same as tap gesture.
• Opens the pop-up menu.
• Activates the item selected by the cursor.
Long push: Works the same as long tap ges-
ture.
• Enables editing of display icons.
Joystick operation:
Cursor mode operation:
• Moves the cursor.
Scroll mode operation:
• Pans the display (Plotter/Weather/Radar
display).
• Shifts the range and scrolls back the picture
(Fish finder display).
Function
Opens Quick Page
ENT
Push Push Push
Opens Data Area
ENT
Push Push Push
1. SYSTEM INTRODUCTION
Function
Push Push Push
Push Push Push
1-5