Furuno Navnet TZtouch3 TZT12F Manual
Ferry mode
Hide thumbs
Also See for Navnet TZtouch3 TZT12F:
- Operator's manual (393 pages) ,
- Installation checklist (12 pages) ,
- Setup manual (12 pages)
Related Manuals for Furuno Navnet TZtouch3 TZT12F
Summary of Contents for Furuno Navnet TZtouch3 TZT12F
- Page 2 Ferry Mode The TZT12F/16F/19F as well as TZTL12F/15F/TZT2BB v7.01 in combination with a DRS series Radar sensor and a compatible SATELLITE COMPASS such as the SCX-20, SC-33, and SC30 can take advantage of the Ferry Mode. On shuttle ferries with one Radar and one heading source, the heading output from an SCX-20, SC-33, or SC30, as well as Radar heading of the sourced DRS, is offset by 180°...
- Page 3 (3) On the TZT12F/16F/19F, or TZtouch2, access [Settings] – [Initial Setup] – [Event Input Configuration] select [Ferry]. (4) Select one of the Radar Sensors as the Radar source and adjust the Radar heading to show echoes in the proper location. How It Works (1) When the boat steers in one direction, use the Radar and Plotter as it is.