Receiving An Individual Call - Furuno FS-1570 Operator's Manual

5 CALLING, RECEIVING

5.2.2 Receiving an individual call

Sending automatic acknowledge (ACK BQ) with comply type "ABLE"
When own ship receives an individual call, you may or may not be able to receive the call
depending on the comply-type setting (on the Auto Ack menu). The relationship between
comply type and automatic/manual acknowledge is as shown in the table below.
Comply type, automatic
acknowledge
AUTO ACK
MANUAL ACK
Note: The handset must be on hook to enable automatic acknowledge.
1. When an individual call is received and the automatic acknowledge feature is active and
the comply type is "ABLE," the display shown below appears. This display indicates that
the auto acknowledge call (ACK BQ) call is being sent.
Able acknowledge
call in progress!
TO SHIP:
ROUTINE
TELEPHONE
DSC FREQ :
TIME TO GO:
2. It takes about 7 sec. to transmit the call, after which the audio alarm sounds and the
following message appears.
Able acknowledge
call transmitted.
TO SHIP:
ROUTINE
TELEPHONE
3. Press the [CANCEL] key to silence the alarm. The following display appears.
Xmitted message
*
MAR-23-2002-23:01
ABLE ACKNOWLEDGEMENT
TO SHIP:
ROUTINE
TELEPHONE
!
RE-SEND
4. You can now communicate with the party, over the radiotelephone frequency specified.
5-10
ABLE
Can send acknowledge
automatically
Can send acknowledge
manually
123456789
CH 201
2177.0 KHZ
6S
123456789
CH 201
STOP ALARM
*
123456789
CH 201
"
ALL VIEW
UNABLE
Can send UNABLE
automatically.
Can send UNABLE manually.