Nbdp Transmitting, Receiving; Manual Calling - Furuno FS-1570 Operator's Manual

11 NBDP TRANSMITTING,
RECEIVING
This chapter mainly shows you how to transmit and receive telex messages.

11.1 Manual Calling

The simplest way to communicate with a telex subscriber is Manual Calling. For the ARQ
mode, you may display beforehand the message to send, or type your message manually.
For manual calling, observe the frequency prior to calling carefully to avoid false
transmission.
1. Press the function key [F3] to display the Operate menu.
2. Press the [0] key to choose Set Frequency.
3. Input Tx and Rx frequency pair.
4. Press the [Enter] key.
Operate
1: Call Station
2: Macro Operation
3: File to Send
4: Cancel Sending
5: Scan (Start/Stop)
6: Manual Reception
7: Timer Operation
8: High Tension ON
9: Manual Calling
0: Set Frequency
Operate menu
Set Frequency
Tx Freq:
RX Freq:
Set frequency screen
0.00
0.00
11-1