Choosing Channel, Frequency - Furuno FS-1570 Operator's Manual

2 SSB RADIOTELEPHONE

2.1.2 Choosing channel, frequency

Choosing channel
1. Rotate the [ENTER] knob to choose CH and then push the [ENTER] knob.
MODE: SSB SIMP
200
CH: 800
TX: 2182.0
RX: 2182.00
AGC : FAST
SEN
VOL
2. Channel can be entered directly with the numeric keys, or by using the [ENTER] knob.
See below for details.
Entering band and band channel with the numeric keys: Use the numeric keys to
enter band and band channel and then push the [ENTER] knob.
Choosing band and band channel with the ENTER knob:
a) Use the [FILE/CURSOR] key to place the cursor in the band or band channel position,
whichever you want to change.
200
Cursor position for
selection of channel
b) Rotate the [ENTER] knob to set band (or channel) desired.
2 4 6 8 12
ITU band
Setting Range
ITU Band: 2/4/6/8/12/16/18/24/25
User Band: 01-029 (leadiing zero necessary)
ITU Channel: XX01 - XX236 (rendering on band or mode)
User Channel: XXX01 - XXX99
c) Push the [ENTER] knob. The TX and RX frequencies of the channel entered
appear.
2-2
HIGH
KHZ
KHZ
S
IA 0.0A
200
Cursor position for
selection of band
16 18 22 25 001 002----- 029
User channel