Furuno FS-1570 Operator's Manual page 49

10. The COMPOSE MESSAGE screen is redisplayed. Push the [ENTER] knob to open the
COM. TYPE menu.
Compose message
**
DISTRESS
CALL TYPE:
NATURE: FLOODING
TELEPHONE
°
POS: 35 N 135˚00E AT 23:25
NBDP-FEC
COM. TYPE: TELEPHONE
DSC FREQ : 2187.5 KHZ
GO TO ALL VIEW
11. Rotate the [ENTER] knob to choose TELEPHONE or NBDP-FEC as appropriate and
then push the [ENTER] knob. (Telephone is the usual mode, however NBDP may also
be used.)
12. Push the [ENTER] knob to open the DSC FREQ menu.
Compose message
**
AUTO
DISTRESS
CALL TYPE:
2187.5
4207.5
NATURE: FLOSIGNATED
6312.0
°
POS: 35 N 135˚00E AT 23:25
8414.5
COM. TYPE: TELEPHONE
12577.0
16804.5
DSC FREQ :
GO TO ALL VIEW
13. Rotate the [ENTER] knob to choose a DSC frequency (normally 2187.5 kHz) and then
push the [ENTER] knob. (AUTO retransmits the distress alert on the distress and
safety frequencies 2 MHz, 8 MHz, 16 MHz, 4 MHz, 12 MHz and 6 MHz in that order if
the distress alert is not acknowledged.)
14. The display changes as below (example).
Compose message
DISTRESS
CALL TYPE:
NATURE: FLOODING
° °
POS: 35 N 135 00E AT 23:25
COM. TYPE :
DSC FREQ :
GO TO ALL VIEW
15. Press the [DISTRESS] button more than three seconds to send the distress alert.
Distress
call in progress!
NATURE: FLOODING
12 ° 34N 123 ° 45E AT 12:34
POS:
TELEPHONE
DSC FREQ :
TIME TO GO :
16. For telephone, follow steps 3 to 6 on page 4-2 and 4-3. For NBDP, follow the
procedure below.
**
**
2187.5 KHZ
TELEPHONE
2187.5 KHZ
2182.0 KHZ
2187.5 KHZ
38S
4 DISTRESS OPERATIONS
4-5