Nbdp Terminal Unit Maintenance; Cleaning The Equipment; Connectors And Earth Connection; Floppy Disk Drive - Furuno FS-1570 Operator's Manual

Test acknowledge call received
The audio alarm sounds; press the [CANCEL] key to silence the alarm. The display
changes as below.
Received message
*
MAR-23-2002-23:59 ECC : OK
TEST ACKNOWLEDGEMENT
FROM COAST :
001234567
SAFETY
NO INFORMATION
GO TO ALL VIEW
No response! Try calling again?
Re-send call: Push the [ENTER] knob and then press the [CALL] key.
Cancel call: Press the [CANCEL] key to return to the DSC standby screen.

12.8 NBDP Terminal Unit Maintenance

Regular maintenance is important for good performance. A regular maintenance program
should be established and should at least include the items mentioned below.

12.8.1 Cleaning the equipment

Wipe of accumulated dust from the terminal unit with a soft cloth. Wipe the LCD carefully to
prevent scratching, using tissue paper and an LCD cleaner. To remove dirt or salt deposits,
use an LCD cleaner, wiping slowly with tissue paper so as to dissolve the dirt or salt.
Change paper frequently so the salt or dirt will not scratch the LCD. Do not use solvents
such as thinner, acetone or benzene for cleaning; they can remove paint and marks or
deform the equipment.

12.8.2 Connectors and earth connection

Periodically check the connectors for proper seating and the earth connection for rust.
Remove rust to maintain a good ground system.

12.8.3 Floppy disk drive

Clean the floppy disk drive head regularly with a floppy disk drive cleaning disk to prevent
erasure of information stored on disks.
*
12 MAINTENANCE & TROUBLESHOOTING
12-9