Timer Operation; Enabling Timer Operation; Stopping Timer Operation - Furuno FS-1570 Operator's Manual

11.8 Timer Operation

A built-in timer permits automatic transmission and reception of telex messages.

11.8.1 Enabling timer operation

1. Press the function key [F3] to display the Operate menu.
2. Press the [7] key to display the Timer Operation List.
3. Choose the operation (name) you wish to execute. Press the [Enter] key. An asterisk
appears beside the operation selected and "T. Op" appears in reverse video on the
communication status display. If a file stored on a floppy disk is to be sent, be sure the
floppy disk containing the file is inserted in the drive.
4. Choose another operation (name) if desired.
5. Press the [Esc] key.
When the predetermined time comes, the NBDP Terminal Unit automatically sends or
receives the message. The results of timer operation are displayed as either OK or NG (No
Good) on the Timer Operation List.

11.8.2 Stopping timer operation

1. Press the function key [F3].
2. Press the [7] key.
3. Choose the operation (name) which has an asterisk attached to it and then press the
[Enter] key. Remove all asterisks to cancel all timer programs.
Timer Operation List
*1
2
3
OP4
OP5
Timer operation list
Timer Operation List
*1
2
*3
*OP4
*OP5
Timer operation list
11 NBDP TRANSMITTING, RECEIVING
OK
OK
OK
NG
11-11