Furuno FS-1570 Operator's Manual page 64

5 CALLING, RECEIVING
3. Push the [ENTER] knob to display the PRIORITY menu.
Compose message
**
CALL TYPE: ALL SHIPS
SAFETY
PRIORITY
URGENCY
COM. TYPE : TELEPHONE
DISTRESS
DSC FREQ :
GO TO ALL VIEW
4. Rotate the [ENTER] knob to choose SAFETY or URGENCY as appropriate and then
push the [ENTER] knob.(DISTRESS should be used only when there is a life
endangering situation on board your vessel.)
5. Push the [ENTER] knob to open the COM. TYPE menu.
Compose message
**
CALL TYPE : ALL SHIPS
PRIORITY : SAFETY
TELEPHONE
COM. TYPE COM TYPE
NBDP-FEC
DSC FREQ : 2187.5 KHZ
GO TO ALL VIEW
6. Rotate the [ENTER] knob to choose appropriate communications mode and then push
the [ENTER] knob.
7. Push the [ENTER] knob to open the DSC FREQ menu.
Compose message
**
2187.5
4207.5
CALL TYPE : ALL SHIPS
6312.0
PRIORITY : SAFETY
8414.5
COM TYPE : TELEPHONE
12577.0
16804.5
DSC FREQ
8. Rotate the [ENTER] knob to choose frequency and then push the [ENTER] knob.
9. Press the [CALL] key to send the call. For an urgency or safety call, the display shows
"All ships call in progress!".
All ships
call in progress!
SAFETY
TELEPHONE
DSC FREQ :
TIME TO GO:
10. The radiotelephone screen automatically appears after the call is sent (timer counts
down to zero). The equipment is then set up for telephone (or NBDP) and safety or
urgency priority, using DSC pair frequencies.
5-2
**
2187.5 KHZ
**
**
2187.5KHZ
GO TO ALL VIEW
2182.0 KHZ
2187.5 KHZ
5S