Pstn Call; Sending A Pstn Call, Receiving Acknowledge Back (Ack Bq) - Furuno FS-1570 Operator's Manual

5 CALLING, RECEIVING
4. Confirm your position and then press the [CALL] to send the position data call
(transmission time: approx. 7 sec.). The display changes as below.
Pos acknowledge
call in progress!
TO SHIP :
123456789
ROUTINE
POS:
35˚00N 135˚00E AT 23:01
DSC FREQ :
TIME TO GO:
5. The DSC standby screen automatically appears after the call is sent.

5.9 PSTN Call

The PSTN call allows the making and receiving of telephone calls over public switched
telephone networks. To use the PSTN call feature, use a handset which has a HOOK
ON/OFF function. The standard supply handset has this feature.

5.9.1 Sending a PSTN call, receiving acknowledge back (ACK BQ)

1. Press the [2/DSC] key and then push the [ENTER] knob to open the CALL TYPE menu.
Compose message
**
INDIVIDUAL
PSTN CALL
: All ships
CALL TYPE
TEST CALL
: Safety
STATION ID
ALL SHIPS
: Telephone
PRIORITY
GROUP CALL
: 2187.5 kHz
COM. TYPE
AREA CALL
$
COM. FREQ
POSITION
DSC FREQ
2. Rotate the [ENTER] knob to choose PSTN CALL and then push the [ENTER] knob.
Note: If you have registered some coast IDs (Chapter 6) you can insert a desired coast
station ID in your message as follows:
1. Press the [FILE/CURSOR] key after completing step 2.
2. Rotate the [ENTER] knob to choose file which contains ID you want to use and
push [ENTER] knob to show ID number.
3. Push the [ENTER] knob again to insert the coast ID into your message.
4. Go to step 5.
3. Push the [ENTER] knob to open the COAST ID menu.
Compose message
**
PSTN CALL
CALL TYPE:
COAST ID 00000000
- - - - - - - - - - - - - - - -
TEL NO. :
:12M-INTL
DSC FREQ
GO TO ALL VIEW
5-38
2177.0 KHZ
7S
Rotate [ENTER] knob to scroll.
**
POLLING
NEUTRAL
MEDICAL
RELAY ALL
RELAY SEL
DISTRESS
**