Receiving A Group Call - Furuno FM-8800D Operator's Manual

3. DSC OPERATION FOR NON-DISTRESS CASES
3.2.2

Receiving a group call

Group ID must be registered in order to receive a group call. See paragraph 4.5.
1. When a group call is received, the alarm sounds and the ALARM LED blinks
two minutes.
2. Press the CANCEL or ENT key to silence the alarm. The following display
appears.
3. Press the ENT key. You can now communicate with the party, over the VHF
channel specified.
Note: If you press the ACK key, instead of CANCEL or ENT key at step 2 above,
the display changes to the standby display, indicating channel specified.
3-12
Group
call received.
FROM : 123456789
TO : 0234567
ROUTINE
COMM MODE : TELEPHONE
COMM OPTION : NO INFO
CH : 12
NO ACK REQ
CANCEL ALARM
** Received Message **
APR01/04 12 : 34 ECC : OK
GROUP CALL
FROM : 123456789
TO : 023456789
ROUTINE
COMM MODE : TELEPHONE
COMM OPTION : NO INFO
CH : 12
NO ACK REQ
PRESS ENT TO CHANGE CH