Kubota GL6000A-AU-B Workshop Manual page 92

GL6000A-AU-B, GL6000D-AU-B,GL9000A-AU-B, GL9000D-AU-B, WSM
Rocker Arm and Push Rod
1. Remove the rocker arm bracket screws (1).
2. Remove the rocker arm assembly (2).
3. Remove the push rods (3).
(When reassembling)
• When putting the push rods (3) onto the tappets (4), check to
see if their ends are properly engaged with the dimples.
IMPORTANT
• After installing the rocker arm, be sure to adjust the valve
clearance.
Tightening torque Rocker arm bracket screw
(1) Rocker Arm Bracket Screw
(2) Rocker Arm Assembly
(3) Push Rod
(4) Tappet
1-S30
ENGINE
9.81 to 11.2 N·m
1.00 to 1.15 kgf·m
7.24 to 8.31 lbf·ft
[A] GL6000A-AU-B, GL6000D-AU-B
[B] GL9000A-AU-B, GL9000D-AU-B
9Y1211607ENS0042US0
KiSC issued 06, 2016 A