Checking, Disassembling And Servicing; Checking And Adjusting; Control Panel - Kubota GL6000A-AU-B Workshop Manual

GL6000A-AU-B, GL6000D-AU-B,GL9000A-AU-B, GL9000D-AU-B, WSM

4. CHECKING, DISASSEMBLING AND SERVICING

[1] CHECKING AND ADJUSTING

(1) Control Panel

Main Switch
1. Open the control panel (1).
2. Disconnect the 4P connector (3) and remove the main switch
(2).
3. Perform the following checks.
(1) Control Panel
(2) Main Switch
Connector Voltage
1. Measure the voltage with a voltmeter between the connector
30 terminal and chassis.
2. If the voltage differs from the battery voltage, the wiring harness
is faulty.
Connector 30 terminal –
Voltage
chassis
2-S12
GENERATOR
(3) 4P Connector
9Y1211607GRS0013US0
Approx. battery voltage
9Y1211607GRS0014US0
KiSC issued 06, 2016 A