Kubota GL6000A-AU-B Workshop Manual page 135

Diesel generator
Table of Contents

Advertisement

GL6000A-AU-B, GL6000D-AU-B,GL9000A-AU-B, GL9000D-AU-B, WSM
 Mode Icon
An icon is displayed in the mode icon section to indicate the mode the controller is currently in.
Icon
 Load Switching Icon
An icon is displayed in the load switching icon section to indicate the current operation status of the controller.
Icon
NOTE
• In standard configuration the controller is not setup for mains fail or auto transfer switch (ATS) control.
Please see your local KUBOTA dealer for configuration of these applications.
 Alarm Icon
An icon is displayed in the alarm icon section to indicate the alarm that is current active on the controller.
In the event of a warning alarm, the LCD only displays the alarm icon. In the event of an electrical trip or shutdown
alarm, the module displays the alarm icon and the stop/reset mode
sounding of a buzzer. To reset the alarm icon and buzzer, rectify the fault/cause then press the stop/reset button.
If multiple alarms are active at the same time, the alarm icon automatically cycles through all the appropriate icons
to indicate each alarm which is active.
Appears when the engine is at rest and the unit is in stop mode.
Appears when the engine is at rest and the unit is in auto mode.
Appears when the engine is at rest and the unit is waiting for a manual start.
Appears when a timer is active, for example cranking time, crank rest etc.
Appears when the engine is running, and all timers have expired, either on or off load.
The animation speed is reduced when running in idle mode.
Appears when the unit is in the front panel editor.
Appears when a USB connection is made to the controller.
Appears if either the configuration file or engine file becomes corrupted.
Appears when the generator is at rest and is not connected to an auto transfer switch
(ATS) system.
Appears when the generator is available and is not connected to an auto transfer switch
(ATS) system.
Description
Description
button LED begins to flash along with the
2-M10
GENERATOR
9Y1211607GRM0014US0
9Y1211607GRM0015US0
9Y1211607GRM0016US0
9Y1211607GRM0017US0
KiSC issued 06, 2016 A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gl9000a-au-bGl9000d-au-bGl6000d-au-b

Table of Contents