Kubota GL6000A-AU-B Workshop Manual page 122

GL6000A-AU-B, GL6000D-AU-B,GL9000A-AU-B, GL9000D-AU-B, WSM
Armature Coil
1. Check the continuity across the commutator and armature coil
core with an ohmmeter.
2. If it conducts, replace the armature.
3. Check the continuity across the segments of the commutator
with an ohmmeter.
4. If it does not conduct, replace the armature.
Overrunning Clutch
1. Check the pinion and if worn or damage, replace the clutch
assembly.
2. Check that the pinion turns freely and smoothly in the
overrunning direction and does not slip in the cranking direction.
3. If the pinion slips or does not turn in both directions, replace the
overrunning clutch assembly.
NOTE
• Do not wash off the grease in the overrunning clutch with
the chemicals or oils.
[A] Electromagnetic Drive Type
Brush Holder
1. Check the continuity across the brush holder and the holder
support with an ohmmeter.
2. If it conducts, replace the brush holder.
1-S60
ENGINE
9Y1211607ENS0104US0
[B] Planetary Gear Reduction Type
9Y1211607ENS0105US0
9Y1211607ENS0106US0
KiSC issued 06, 2016 A