Kubota GL6000A-AU-B Workshop Manual page 140

GL6000A-AU-B, GL6000D-AU-B,GL9000A-AU-B, GL9000D-AU-B, WSM
Icon Designation
Controller
Information
 Digital Controller Time and Date Setting
This controllers contains an onboard clock for event log and operational purposes. If the date or time displayed
is incorrect, please consult your local Kubota dealer for instructions on resetting.
Event Log
This controllers event log contains a list of the last 50 record shutdown events and the engine hours at which they
occurred.
Once the log is full, any subsequent electrical trip or shutdown alarms overwrites the oldest entry in the log.
Hence, the log always contains the most recent shutdown alarms. The controller logs the alarm, along with the engine
running hours.
 Viewing The Event Log
To view the event log, press both
displayed. Once entered, cycle to the event log (
To view the individual events in the event log, scroll through by pressing the
the LCD screen displays the desired event.
Continuing to press down the
display shows the most recent alarm and the cycle begins again.
To exit the event log, press the
Once entered, cycle to the desired instrumentation section.
Description
Designates the model and version of the controller
and software
(up) and (down) buttons simultaneously, the navigation menu is then
) section and enter.
(up) or (down) buttons will cycle through the past alarms after which the
(up) and (down) buttons simultaneously to enter the navigation menu.
2-M15
(up) or
(A) Icon to indicate that the event.
(B) The engine hours at which the event occurred.
(C) Icon to indicate shutdown alarm that has been recorded.
(D) Current operating state of the module.
(E) Number of event displayed out.
GENERATOR
Screen View
9Y1211607GRM0022US0
9Y1211607GRM0023US0
(down) buttons until
9Y1211607GRM0024US0
KiSC issued 06, 2016 A