Advertisement
LCD Flicker Measuring Probe is applied to the "Flicker measuring function". Because of this it is not able to measure the display whose emission
intensity fluctuates in single frame scanning period.
DISPLAY COLOR ANALYZER
CA-210
LCD Flicker Measuring Probe
Small LCD Flicker Measuring Probe
Same model as CA-210
measuring probes sold until May 2003.
CRT COLOR ANALYZER
CA-100Plus
Measuring Probe
High luminance Measuring Probe
Please request a CA-100Plus catalog for further information.
Applicability of CA series for different display types
This table is based on the most popular method for controlling emission intensity for
each display type.
(∗1) Measurements of displays using certain control methods are not possible. For
details of measurement compatibility, contact your nearest Minolta representative.
Examples for which measurement is not possible:
• Displays which use PWM, etc. for control of emission intensity.
• Displays with backlights which emit intermittently.
• Displays which write black for each frame,
etc.
(∗2) Although the CA-100Plus can handle the emission intensity variation, the
instrument has a wide acceptance angle which makes it unsuitable for
measurements of LCDs with strong viewing-angle dependency.
Recommended
Measurement possible with restrictions, but probes marked with
Measurement not possible
Transmissive /
semi-transmissive LCD
Rear Screen
Projector
OLED
PDP
FED
LCD Flicker Measuring Probe and Small LCD Flicker Measuring Probe are unsuitable for Measurements of CRTs.
Select the probe among the following four types.
�
LCD Flicker Measuring Probe
(Measurement area φ27 mm / Cable length: 2 m)
�
LCD Flicker Measuring Probe
(Measurement area φ27 mm / Cable length: 5 m)
�
Small LCD Flicker Measuring Probe
(Measurement area φ10 mm / Cable length: 2 m)
�
Small LCD Flicker Measuring Probe
(Measurement area φ10 mm / Cable length: 5 m)
Up to five probes can be connected to a single main body. Universal Measuring Probes, Small Universal Measuring
Probes, LCD Flicker Measuring Probes and Small LCD Flicker Measuring Probes can be connected simultaneously to
a single main body.
(To connect multiple probes, the optional four-point extension board (CA-B14) is necessary.)
Select the probe among the following four types.
�
Measuring Probe
(Cable length: 2 m)
�
Measuring Probe
(Cable length: 5 m)
�
High luminance Measuring Probe
(Cable length: 2 m)
�
High luminance Measuring Probe
(Cable length: 5 m)
Up to five probes can be connected to a single main body. Measuring Probes and High luminance Measuring Probes
can be connected simultaneously to a single main body.
(To connect multiple probes, the optional four-point extension board (CA-B04) is necessary.)
are recommended
Active Matrix Driven
Passive Matrix Driven
LCD
Active Matrix Driven
Passive Matrix Driven
DLP
CRT
Active Matrix Driven
Passive Matrix Driven
CA-P12
CA-P15
CA-PS12
CA-PS15
CA-P02
CA-P05
CA-PH02
CA-PH05
CA-210
Standard
LCD flicker
measurements
measurements
Advertisement
