Copying Onto Regular Size Paper - Ricoh Pro C751EX Operating Instructions Manual

• To prevent multiple sheets from being fed at once, fan paper before placing it on the tray.
• When copying multiple originals using the exposure glass, pages are delivered in reverse order
because the factory default setting is face up. If you place originals on the exposure glass and want
the copies to be delivered face down, select Face Down for Copy Eject Face Method in Glass
Mode. For details about Copy Eject Face Method in Glass Mode, see p.269 "Input / Output".
• If you select Tab Stock, you cannot have copies delivered face up.
• Depending on the environment where the machine is being used, you might at times hear a rustling
noise from paper moving through the machine. This noise does not indicate a malfunction.

Copying onto Regular Size Paper

Use the following procedure to copy onto regular size paper fed in from the multi bypass tray (tray 6).
1. Place paper print side up on the multi bypass tray (tray 6).
2. While pinching the release lever, adjust the side fences to the size of the paper.
3. Set the end fence, and then press the elevator switch on the multi bypass tray (tray 6).
4. Select the multi bypass tray (tray 6) on the control panel.
5. Press the [ ] key.
6. Press [Select Regular Size].
7. Select the paper size.
Copying from the Multi Bypass Tray (Tray 6)
2
61