User Stamp - Ricoh Pro C751EX Operating Instructions Manual

Default: [1 X]
• Density
You can set the pattern used to print the stamp.
Default: [Normal]
• Normal
The stamp is printed on the image. You cannot check which parts will overlap.
• Lighter
The image can be seen through the stamp.
• Lightest
The image appears even clearer than in the Lighter setting.
• Adj. Back Side Stamp Position
You can adjust the stamp position for back side in duplex mode, within the available range as
shown below.
Top-Bottom: Top 17.0 inches Bottom 17.0 inches
Left-Right: Left 17.0 inches Right 17.0 inches
• Page to Stamp
You can have the stamp printed on the first page or all pages.
Default: [All Pages]
Stamp Color
Sets the stamp print color.
Default: [Black]

User Stamp

This section describes the user tools in the User Stamp menu under Stamp.
Program / Delete Stamp
You can register, change, or delete user stamps.
You can register up to five custom stamps with your favorite designs.
For details about how to program the user stamp, see p.161 "User Stamp".
Stamp Format:1 5
Specify how each of registered user stamps 1 to 5 is printed.
• Stamp Position
Specify where to print the user stamp.
Default: [Top Right]
Stamp
6
263