Ricoh Pro C751EX Operating Instructions Manual page 104

2. Basic Copying
• Print quality over fold lines might be reduced. This is due to cracking within the fused toner. Loss of
surface along fold lines can also occur with some types of paper. To avoid possible wastage, print
a single test sheet before beginning a print run.
• Copying will stop if the number of copies exceeds tray capacity. If this happens, remove copies
from the folding unit tray to resume copying.
• The capacity of the folding unit tray may vary depending on the fold settings and the condition of
2
the paper.
• You can change the fold types shown on the initial display under Input / Output in User Tools. For
details, see p.269 "Input / Output".
Z-fold
Makes two parallel folds, one of which faces in and the other facing out.
• You cannot use Punch with this function.
Original orientation and Z-fold position
Place all the originals in the ADF in the orientation in which they can be read normally. When
placing the original on the exposure glass, keep the same orientation, but set the original facing
downwards.
The relationship between the orientation in which you place the original and the Z-fold positions is
as follows:
102
BZH089
BZH090