Changing A Stored Program - Ricoh Pro C751EX Operating Instructions Manual

4. Press the program number you want to store.
5. Enter the program name with the letter keys on the display panel.
You can enter up to 40 characters.
6. Press [OK].
The screen returns to the program screen, showing the program number followed by the program
name. The screen returns to the initial copy display after a short time.
• Program numbers with

Changing a Stored Program

1. Check the program settings.
2. Specify the contents of a program.
3. Press the [Program] key.
4. Press [Program].
5. Press the program number you want to change.
6. Press [Yes].
7. Enter the program name.
You can enter up to 40 characters.
8. Press [OK].
The screen returns to the program screen, showing the program number followed by the program
name. The screen returns to the initial copy display after a short time.
• To check the contents of a program, recall the program.
• When it is overwritten, the previous program is deleted.
against them already have settings made for them.
Registering Frequently Used Functions
2
123